YAMAHA MGP24X
โปรโมชั่นพิเศษสุดยังลดราคาได้อีก โทร. 085-6383516
Mixer รุ่นใหม่ จาก YAMAHA MGP Series
MGP32X / MGP24X Specifications
Outline | MGP32X | MGP24X | |
---|---|---|---|
Mixing capability | Mixing channels | 32 Line Inputs (24 mono and 4 stereo) | 24 Line Inputs (16 mono and 4 stereo) |
GROUP | 4 GROUP Buses + ST Bus | 4 GROUP Buses + ST Bus | |
AUX | 6 AUX Sends + 2 FX Sends | 6 AUX Sends + 2 FX Sends | |
MATRIX | 1 Matrix out | 1 Matrix out | |
On-board processors | FX1:REV-X(8 PROGRAM, PARAMETER control)/ FX2:SPX(16 PROGRAM, PARAMETER control) | FX1:REV-X(8 PROGRAM, PARAMETER control)/ FX2:SPX(16 PROGRAM, PARAMETER control) | |
I/O | Mic inputs | MIC: 24 (INPUTS HPF: 100Hz 12dB/oct) | MIC: 16 (INPUTS HPF: 100Hz 12dB/oct) |
Phantom power | 48V phantom power per channel | 48V phantom power per channel | |
Line inputs | LINE: 24 mono + 4 stereo, CH INSERT: 24 RETURN: 1 stereo | LINE: 16 mono + 4 stereo, CH INSERT: 16 RETURN: 1 stereo | |
Digital I/O | USB Device, iPod / iPhone | USB Device, iPod / iPhone | |
General specifications | MGP32X | MGP24X | |
Total harmonic distortion | 0.02% (20Hz-20kHz@ +14dBu) | 0.02% (20Hz-20kHz@ +14dBu) | |
Frequency response | +0.5/-1.0dB 20Hz - 20kHz, refer to the nominal output level @1kHz | +0.5/-1.0dB 20Hz - 20kHz, refer to the nominal output level @1kHz | |
Hum & noise level | Equivalent input noise | -128 dBu Equivalent Input Noise | -128 dBu Equivalent Input Noise |
Residual output noise | -94 dBu Residual Output Noise | -94 dBu Residual Output Noise | |
Crosstalk | -74dB @ 1kHz | -74dB @ 1kHz | |
Power requirements | 100-240V 50Hz/60Hz | 100-240V 50Hz/60Hz | |
Power consumption | 86W max | 86W max | |
Dimensions | W | 1,027mm (40.4") | 819mm (32.2") |
H | 169mm (6.7") | 169mm (6.7") | |
D | 565mm (22.2") | 565mm (22.2") | |
Net weight | 19kg (41.9lb) | 15.5kg (34.2lb) |
MGP16X / MGP12X Specifications
Outline | MGP16X | MGP12X | |
---|---|---|---|
Mixing capability | Mixing channels | 16 Line Inputs (8 mono and 4 stereo) | 12 Line Inputs (4 mono and 4 stereo) |
GROUP | 4 GROUP Buses + ST Bus | 4 GROUP Buses + ST Bus | |
AUX | 2 AUX Sends + 2 FX Sends | 2 AUX Sends + 2 FX Sends | |
Input channel functions | Compressor CH1-8,HPF(100Hz 12dB/oct), CH EQ(MONO) ±15dB(Max.):High 8kHz shelving/ Mid 250Hz-5kHz peaking(CH1-8,13-16)/ Low 125Hz shelving, CH EQ(STEREO) ±15dB(Max.):High 8kHz shelving/ Mid 2.5kHz peaking(CH9-12)/ Low 125Hz shelving | Compressor CH1-4,HPF(100Hz 12dB/oct), CH EQ(MONO) ±15dB(Max.):High 8kHz shelving/ Mid 250Hz-5kHz peaking(CH1-4,9-12)/ Low 125Hz shelving, CH EQ(STEREO) ±15dB(Max.):High 8kHz shelving/ Mid 2.5kHz peaking(CH5-8)/ Low 125Hz shelving | |
On-board processors | FX1:REV-X(8 PROGRAM, PARAMETER control), FX2:SPX (16 PROGRAM, PARAMETER control) | FX1:REV-X(8 PROGRAM, PARAMETER control), FX2:SPX (16 PROGRAM, PARAMETER control) | |
I/O | Mic inputs | MIC: 10 | MIC:6 (100Hz 12dB/oct) |
Phantom power | 48V phantom power per channel | 48V phantom power per channel | |
Line inputs | LINE: 8mono+4stereo, CH INSERT: 8, RETURN: 1stereo, 2TR IN: 1 stereo | LINE: 4mono+4stereo, CH INSERT IN: 4, RETURN: 1stereo, 2TR IN: 1 stereo | |
Digital I/O | USB Audio USB IN: iPod, iPhone exclusive | USB Audio USB IN: iPod, iPhone exclusive | |
General specifications | MGP16X | MGP12X | |
Total harmonic distortion | 0.02% (20Hz-20kHz@ +14dBu) | 0.02% (20Hz-20kHz@ +14dBu) | |
Frequency response | +0.5/-1.0dB 20Hz - 20kHz, refer to the nominal output level @1kHz | +0.5/-1.0dB 20Hz - 20kHz, refer to the nominal output level @1kHz | |
Hum & noise level | Equivalent input noise | -128 dBu (20Hz–20 kHz, Rs=150Ω, Input Gain = Maximum) | -128 dBu (20Hz–20 kHz, Rs=150Ω, Input Gain = Maximum) |
Residual output noise | -102 dBu (20Hz–20 kHz, Rs=150Ω, Input Gain = Maximum) | -102 dBu (20Hz–20 kHz, Rs=150Ω, Input Gain = Maximum) | |
Crosstalk | -74dB @ 1kHz | -74dB @ 1kHz | |
Power requirements | 100-240V 50Hz/60Hz | 100-240V 50Hz/60Hz | |
Power consumption | 55W max | 45W max | |
Dimensions | W | 447mm | 348mm |
H | 143mm | 143mm | |
D | 495mm | 495mm | |
Net weight | 9.0kg | 7.5kg |
Analog input specifications
Input terminal |
Actual source impedance |
For use with nominal |
Input level | Connector | ||||
---|---|---|---|---|---|---|---|---|
PAD | GAIN | Sensitivity*1 | Nominal |
Max. before clip |
||||
MONO CH INPUT MGP32X: 1–24 MGP24X: 1–16 |
0 | -60dB | 3kΩ |
50-600Ω Mics |
-80 dBu (0.078 mV) |
-60 dBu (0.775 mV) |
-40 dBu (7.75 mV) |
XLR-3-31 type*2 Phone jack*4 |
-16dB |
-36 dBu (12.3 mV) |
-16 dBu (123 mV) |
+4 dBu (1.23 V) |
|||||
26dB | -34dB |
600Ω Lines |
-54 dBu (1.55 mV) |
-34 dBu (15.5 mV) |
-14 dBu (155 mV) |
Phone jack*3 | ||
+10dB |
-10 dBu (245 mV) |
+10 dBu (2.45 V) |
+30 dBu (24.5 V) |
|||||
STEREO CH INPUT MGP32X: 25–32 MGP24X: 17–24 |
-34dB | 10kΩ |
600Ω Lines |
-54 dBu (1.55 mV) |
-34 dBu (15.5 mV) |
-14 dBu (155 mV) |
Phone jack*4 RCA Pin Jack |
|
+10dB |
-10 dBu (245 mV) |
+10 dBu (2.45 V) |
+30 dBu (24.5 V) |
|||||
MONO CH INSERT INPUT MGP32X: 1–24 MGP24X: 1–16 |
10kΩ |
600Ω Lines |
-20 dBu (77.5 mV) |
0 dBu (0.775 V) |
+20 dBu (7.75 V) |
Phone Jack*5 | ||
ST CH INSERT INPUT L,R | 10kΩ |
600Ω Lines |
-20 dBu (77.5 mV) |
0 dBu (0.775 V) |
+20 dBu (7.75 V) |
Phone Jack*5 | ||
TALKBACK INPUT | 10kΩ |
50-600Ω Mics |
-66 dBu (0.389 mV) |
-50 dBu (2.45 mV) |
-30 dBu (24.5 mV) |
XLR-3-31 type*6 |
0 dBu is referenced to 0.775 Vrms. 0 dBV is referenced to 1 Vrms.
*1 Sensitivity is the lowest level that will produce an output of +4 dB (1.23 V), or the nominal output level when the unit is set to maximum level. (all faders and level controls are at maximum position.)
*2 XLR-3-31 type connectors are balanced .(1=GND, 2=HOT, 3=COLD)
*3 Phone Jacks are balanced. (Tip=HOT, Ring=COLD, Sleeve=GND)
*4 Phone Jacks are unbalanced.
*5 Phone Jacks are unbalanced.(Tip=Out, Ring=In, Sleeve=GND)
*6 XLR-3-31 type connectors is unbalanced.
Analog output specifications
Output terminal |
Actual source impedance |
For use with nominal |
Output level | Connector | |
---|---|---|---|---|---|
Nominal | Max. before clip | ||||
ST OUT [L,R] | 75Ω | 600Ω Lines |
+4 dBu (1.23 V) |
+24 dBu (12.3 V) |
XLR3-32 type*1 Phone jack*4 |
MONO OUT | 75Ω | 600Ω Lines |
+4 dBu (1.23 V) |
+24 dBu (12.3 V) |
XLR3-32 type*1 |
GROUP OUT (1-4) | 150Ω | 10kΩ Lines |
+4 dBu (1.23 V) |
+20 dBu (7.75 V) |
Phone jack*2 |
AUX SEND (1-6) | 75Ω | 600Ω Lines |
+4 dBu (1.23 V) |
+24 dBu (12.3 V) |
XLR3-32 type*1 |
MATRIX OUT (1, 2) | 150Ω | 10kΩ Lines |
+4 dBu (1.23 V) |
+20 dBu (7.75 V) |
Phone jack*2 |
MONO CH INSERT OUT MGP32X: 1–24 MGP24X: 1–16 |
75Ω | 10kΩ Lines |
0 dBu (0.775 V) |
+20 dBu (7.75 V) |
Phone jack*3 |
ST CH INSERT OUT [L,R] | 75Ω | 10kΩ Lines |
0 dBu (0.775 V) |
+20 dBu (7.75 V) |
Phone jack*3 |
MONITOR OUT [L,R] | 150Ω | 10kΩ Lines |
+4 dBu (1.23 V) |
+20 dBu (7.75 V) |
Phone jack*2 |
PHONES OUT | 150Ω | 40Ω Phones | 3mW | 75mW | ST Phone Jack |
0 dBu=0.775 Vrms, 0 dBV=1 Vrms
*1 XLR-3-32 type connectors are balanced. (1=GND, 2=HOT, 3=COLD)
*2 Phone jacks are impedance balanced. (Tip=HOT, Ring=COLD, Sleeve=GND)
*3 Phone jacks are unbalanced. (Tip=Out, Ring=In, Sleeve=GND)
*4 Phone jacks are balanced. (Tip=HOT, Ring=COLD, Sleeve=GND)
เขียนข้อคิดเห็น
ชื่อของคุณ:ความคิดเห็น: หมายเหตุ: HTML นี้ไม่สามารถแปล!
ให้คะแนน: แย่ ดี
พิมพ์รหัสป้องกันสแปม: