แบรนด์สินค้า 
Turbosound iQ8
โปรโมชั่นพิเศษสุดยังลดราคาได้อีก โทร. 085-6383516
2,500 Watt 2 Way 8" Powered Loudspeaker with KLARK TEKNIK DSP Technology, Speaker Modelling and ULTRANET Networking
The 2,500-Watt iQ8 is a powered two-way loudspeaker ideally suited for a wide range of portable and fixed installation, music and speech sound reinforcement applications. The driver complement includes an 8" low frequency driver with a low mass voice coil for improved transient response, and a high temperature 1" compression driver with copper-clad aluminium voice coil for extended high frequency reproduction.
Equipped with a very efficient and lightweight two channel KLARK TEKNIK Class-D power amplifier, the iQ8 provides an impressive 2,500 Watts of output power. A high degree of control over the loudspeaker system’s performance is managed by a sophisticated, but easy to useKLARK TEKNIK Digital Signal Processor (DSP), which provides dynamic EQ for remarkable full range response at low volume levels, and transparent limiting for the utmost clarity at high output levels – and long-term reliability. iQ8’s advanced DSP speaker modelling presets include detailed and accurate models of some of the audio industry’s most-respected loudspeakers.
KLARK TEKNIK also developed a highly versatile Spatial Contour Control (SCC) DSP function, which allows the user to easily optimise the iQ8’s frequency response for the physical speaker placement. This advanced functionality provides frequency compensation for stand, floor, wall or ceiling placement, much like the adjustments commonly found on studio reference monitors.
On the rear panel amplifier module, you will find a fully featured user interface consisting of an LCD display, the Channel A and B gain controls, and a single rotary encoder for intuitive access to level, EQ, Speaker modelling, SCC, Subwoofer Integration and Feedback Control (FBI). In addition to the two combination balanced XLR/jack inputs, balanced XLR outputs for each of the two independent channels, and a Mix Out XLR connector, the iQ8 features a mic/line switch and level control with signal present LED on each channel.
The iQ8 also features our proprietary ULTRANET technology, which allows the use of CAT5 cables for transmitting pristine multi-channel audio signals and other information between ULTRANET-enabled products, such as digital mixers and personal monitor systems. This digital distribution networking not only eliminates the potential for RFI and crosstalk so common to analogue methods, but also significantly reduces the setup or installation time required. An onboard USB port provides access for remote control of the iQ8 via PC computer, as well as DSP and speaker modelling firmware updates.
Specifications
| Frequency Response |
60 Hz – 18 kHz ±3 dB 55 Hz – 20 kHz -10 dB |
|---|---|
| Nominal Dispersion | 90° H x 90° V @ -6 dB points |
| Maximum SPL | 122 dB peak |
| Crossover type | Active |
| Transducers |
1 x 8" (208 mm) LF driver 1 x 1" (25.4 mm) HF compression driver |
| Limiter | Independent HF, LF, peak and rms |
| Maximum output power* | 2,500 W |
| Type | Class-D |
| Protection | Short circuit, open circuit, thermal |
| Input A / B | 2 x combo jack/XLR |
| Sensitivity | Line +4 dBu, mic -22 dBu, switchable |
| Input impedance | 20 kΩ unbalanced, 40 kΩ balanced |
| Maximum input level | +21 dBu |
| Output A / B | 2 x XLR Linked to input |
| Mix output | XLR, balanced |
| Output impedance | 100 Ω unbalanced, 200 Ω balanced |
| Ultranet input/link | 2 x RJ45 |
| Mains Supply | Neutrik powerCON input 20A and link 15A |
| DSP |
Rotary push-encoder Buttons for PROCESS, SETUP, EXIT, ENTER |
| Mixer section |
2 x gain controls (channels A and B) 2 x Line/Mic switch |
| Factory EQ presets |
Positioning, Sound mode, Sound modeling, FBQ |
| Display | LCD 128 x 32, blue backlit |
| Delay | 0 - 300 ms |
| Equalisation |
High and low shelving EQ 2 x parametric EQ |
| Limiter | Zero attack input limiter |
| Presets | 20 total presets, 19 user-definable |
| Crossover | High Pass L-R 24 dB/oct |
| Protection | Lock-out function for all settings |
| Digital processing | |
| A/D conversion | 24-bit,44.1/48kHz sample rate |
| Converter type | 24-bit,delta-sigma |
| System | |
| Signal | 16 channels |
| Latency | <0.9 ms |
| Dynamic range | typical 92 dB |
| Cabling | |
| Cables | Shielded CAT5 |
| Cable length | max. 246 ft / 75 m recommended |
| Power consumption | 150 W @ 1/8 max power |
| Voltage (fuses) | |
| USA / Canada | 120 V~, 60 Hz (T 15 A H 250 V) |
| UK / Australia / Europe | 220-240 V~, 50/60 Hz (T 10 A H 250 V) |
| Korea / China | 220-240 V~, 50/60 Hz (T 10 A H 250 V) |
| Japan | 100 V~, 50/60 Hz (T 15 A H 250 V) |
| Dimensions HWD | 457 x 279 x 279 mm (1 |
เขียนข้อคิดเห็น
ชื่อของคุณ:ความคิดเห็น: หมายเหตุ: HTML นี้ไม่สามารถแปล!
ให้คะแนน: แย่ ดี
พิมพ์รหัสป้องกันสแปม:
ติดต่อฝ่ายขายโทร.085-6383516 (K.BUNG)
โทร.092-8188405 (K.KEN)
ซาวด์เอ็นจิเนียร์ โทร.081-7750013 (K.TONY)
อีเมล์:info@hengsound.com 
ห้างหุ้นส่วนจํากัด เฮงซาวด์ดอทคอม 1348/58 ซอยกาญจนาภิเษก008 ถนนกาญจนาภิเษก แขวงบางแค เขตบางแค กรุงเทพฯ10160 โทรศัพท์: 085-6383516 Fax:02-4545255 
