CX108V
โปรโมชั่นพิเศษสุดยังลดราคาได้อีก โทร. 085-6383516
Your shopping cart is empty!
คำอธิบายของผลิตภัณฑ์
Features
- 100 watts per channel at 70 volts
- Compact size—only two rack spaces and 14" deep for reduced rack space
- Channel pairs bridgeable for maximum flexibility
- Exclusive PowerLight switch-mode power supply technology for high performance and compact size
- Active inrush limiting eliminates AC inrush current, removing the need for expensive power sequencers
- Four HD15 DataPort connectors (one per channel pair) for Q-SYS networked control and monitoring
- Custom integrated gain control security cover for tamper-proof installations
- 1-dB recessed detented gain controls for fast and accurate settings
- Detachable Euro-style input and output connectors
- DIP switch control for clip limiters, high-pass filters, bridge mono and parallel operation
- Selectable high-pass filters protect speakers and prevent speaker transformer saturation with minimal effect on program material (50 Hz or 75 Hz)
- Comprehensive front panel indicators including signal, clip, bridge mono and parallel input LEDs
- Fully protected—including DC, infrasonic and ultrasonic, thermal overload and short circuit protection
- High-performance Class AB+B complementary bipolar output circuitry
- Lightweight—only 21 pounds (9.5 kg) for easier racking and shipping
- 3-year warranty plus optional 3-year extended service contract
- All CX Series amplifiers meet the European Union's, 2006 RoHS directive to restrict the use of hazardous materials used in electronic devices.
SPECIFICATIONS | CX168 | CX108V | |
STEREO MODE, All Channels Driven Continuous Average Output Power Per Channel |
|||
8Ω, 0.05% THD 20 Hz–20 kHz | 90 W | - | |
4Ω, 0.1% THD 20 Hz–20 kHz | 130 W | - | |
70 V, 0.2% THD 20 Hz–20 kHz | - | - | 100 W |
Midband Ratings 8Ω, 0.1% THD 1 kHz 4Ω, 0.1% THD 1 kHz |
All channels 100 W 140 W |
Single channel 120 W 180 W |
- - |
BRIDGE MONO MODE | |||
16Ω, 0.1% THD 20 Hz–20 kHz
8Ω, 0.1% THD 20 Hz–20 kHz 140 V, 0.2% THD 20 Hz-20 kHz |
180 W 260 W - |
- - 200 W |
|
Noise (20 Hz–20 kHz) | -107 dB | -100 dB | |
Input Sensitivity (for full-rated output power) | 1.35 V rms @ 8 ohms | 1.26 V rms @ 70V | |
Voltage Gain | 20× (26 dB) | 56× (35 dB) | |
Input Clipping | 6 V rms (+18 dBu) | 6 V rms (+18 dBu) | |
Output Circuitry Class | Class AB+B | Class AB+B | |
Frequency Response |
20 Hz–20 kHz, ± 0.2 dB 8 Hz–50 kHz, +0/-3 dB |
20 Hz–20 kHz, ± 0.4 dB 8 Hz–70 kHz, +0/-3 dB |
|
Damping Factor |
Greater than 200 (5 kHz and below) |
Greater than 500 (5 kHz and below) |
|
Input Impedance |
6 kΩ unbalanced, 12 kΩ balanced |
6 kΩ unbalanced, 12 kΩ balanced |
|
Distortion (SMPTE-IM) | Less than 0.02% | ||
Distortion (typical) 20 Hz–20 kHz: 10 dB below rated power 1.0 kHz and below: at full rated power |
Less than 0.1% THD Less than 0.03% THD |
||
Connectors |
Input: 3-pin Euro-style detachable terminal blocks, (one per ch.) DataPort: HD-15 Connector, (one per channel pair: Ch 1+2, 3+4, 5+6, 7+8) Output: Two 8-pin Euro-style detachable terminal blocks |
||
Cooling | Variable speed fan, rear-to-front airflow through tunnel heat sink | ||
Controls |
Front: AC switch, Ch 1, 2, 3, 4, 5, 6, 7 & 8 gain knobs Rear: DIP switches for Ch. 1–Ch. 8, clip limiter on/off, LF filter on/off, LF filter freq select 33 or 70 Hz for CX168, LF filter freq select 50 or 75 Hz for CX108V, inputs parallel or stereo; bridge mode |
||
Indicators |
PWR-ON: Green LED SIGNAL-35 dB: Green LED (1 per channel) CLIP: Red LED (1 per channel) |
PARALLEL INPUTS: Orange LED (1 per ch. pair) BRIDGED: Yellow LED (1 per ch. pair) |
|
Amplifier Protection | Full short circuit, open circuit, thermal, ultrasonic, and RF protection; Stable into reactive or mismatched loads | ||
Load Protection | On/off muting; Individual channel DC fault blocking | ||
Dimensions (HWD) inches | 3.5 x 19 x 14 / 2RU | ||
Dimensions (HWD) mm | 89 x 483 x 356 / 2RU | ||
Weight | 21 lb (9.5 kg) net, 27 lb (12.3 kg) shipping | ||
Power Requirements | 100, 120, 230 VAC, 50–60 Hz (configured at factory) |
When you order from opencartworks.com, you will receive a confirmation email. Once your order is shipped, you will be emailed the tracking information for your order's shipment. You can choose your preferred shipping method on the Order Information page during the checkout process.
The total time it takes to receive your order is shown below:
The total delivery time is calculated from the time your order is placed until the time it is delivered to you. Total delivery time is broken down into processing time and shipping time.
Processing time: The time it takes to prepare your item(s) to ship from our warehouse. This includes preparing your items, performing quality checks, and packing for shipment.
Shipping time: The time for your item(s) to tarvel from our warehouse to your destination.
Shipping from your local warehouse is significantly faster. Some charges may apply.
In addition, the transit time depends on where you're located and where your package comes from. If you want to know more information, please contact the customer service. We will settle your problem as soon as possible. Enjoy shopping!