QSC CMX300Va
โปรโมชั่นพิเศษสุดยังลดราคาได้อีก โทร. 085-6383516
Features
“Flex-Use” loading options allow you to drive low-impedance loads down to 2 ohms and certain models to drive 70 and 100V distributed loudspeaker systems
• “Flex-Use” Input connectivity choices including actively balanced barrier strip, XLR, or ¼" TRS
• “Flex-Use” Output connectivity choices include NL4 Speakon™ and detachable terminal block
• Rack mountable with chassis less than 16" or 40.6 mm deep
• 1 dB recessed, detented gain controls for fast, accurate and repeatable settings
• Tamper-proof security cover for
gain controls
• Recessed rear DIP switches for easy selection of stereo, parallel, or bridged mode operation, and the additional choice of enabling/disabling low frequency filter protection
• Low-noise variable-speed fans with rear-to-front airflow keep amplifiers and racks cool
Specifications
CM X300Va | CMX 500Va | CMX 800Va | CMX 2000Va | ||
Stereo Mode (both channels driven)8Ω/ FTC 20 Hz – 20 kHz / 0.1% THD8Ω/ EIA 1 kHz / 0.1% THD4Ω/ FTC 20 Hz – 20 kHz / 0.1% THD4Ω/ EIA 1 kHz / 0.5% THD2Ω/ EIA 1 kHz / 1% THD70V Direct Drive / EIA 1 kHz / 1% THD100V Direct Drive / EIA 1 kHz / 1% THD |
185 W200 W280 W300 W430 W – – |
260 W300 W400 W500 W700 W – – |
450 W500 W650 W800 W1200 W400 W – |
1050 W1100 W1600 W2000 W (1% THD)2500 W2500 W1000 W |
|
Bridge Mono Mode8Ω/ FTC 20 Hz – 20 kHz / 0.1% THD8Ω/ EIA 1 kHz / 0.1% THD4Ω/ EIA 1 kHz / 1% THD70V Direct Drive / EIA 1 kHz / 1% THD100V Direct Drive / EIA 1 kHz / 1% THD |
530 W600 W830 W600 W – |
800 W900 W1400 W1200 W600 W |
1300 W1500 W2400 W2000 W2300 W |
3200 W3600 W5000W5000 W3600 W |
|
Signal to Noise (20 Hz – 20 kHz, 8Ω) |
> -100 dB |
> - 100 dB |
> - 100 dB |
> - 100 dB |
|
Input Sensitivity at 8Ω |
1.15 V (+3.4 dBu) |
1.14 V (+3.4 dBu) |
1.23 V (+4.0 dBu) |
1.42 V (+5.3 dBu) |
|
Voltage Gain at 8Ω |
31.6 x (30 dB) |
40 x (32 dB) |
46 x (33 dB) |
64 x (36 dB) |
|
Output Circuitry |
Class AB |
Class AB |
2-tier Class H |
3-tier Class H |
|
PowerRequirementsTypical, 1/8 power pink noise at 4Ω, 120VACTypical, 1/8 power pink noise at 4Ω, 230 VACSevere, 1/3 power pink noise at 4Ω, 120VACSevere, 1/3 power pink noise at 4ΩΩ, 230 VAC |
4.4 A2.2 A6.6 A3.3 A |
5.4 A2.7 A9.6 A4.8 A |
6.3 A3.2 A15.6 A7.8 A |
13.9 A7 A26.9 A13.5 A |
|
Distortion (SMPTE-M) |
< 0.02% |
< 0.01% |
< 0.01% |
< 0.01% |
|
Distortion (typical)20 Hz – 20 kHz: 10 dB below rated power1.0 kHz and below: full-rated power |
< 0.03% THD / 4Ωand 8Ω< 0.03% THD / 4Ωand 8Ω |
||||
Frequency Response |
20 Hz – 20 kHz: ±1 dB -3 dB points: 5 Hz – 50 kHz |
||||
Damping Factor (1 kHz and below) |
> 300 at 8Ω |
||||
Input Impedance |
10k ohms unbalanced, 20k ohms balanced |
||||
Input Clipping |
10 Vrms (+22 dBu) |
||||
Cooling |
Continuously variable-speed fan, rear-to-front air flow |
||||
Connectors (each channel) |
Input: Active balanced; barrier strip, XLR and ¼" (6.3 mm) – TRS tip and XLR pin 2positiveOutput: Detachable terminal block and Neutrik™ Speakon™ |
||||
Controls |
Front: AC switch, Ch. 1 & 2 gain knobsRear: 10-position DIP switch |
||||
Indicators |
Power-on: Green LED / Signal: Green LED (1 per channel) / Clip: Red LED (1 per channel) |
||||
Amplifier Protection |
Stable into reactive or mismatched loads |
||||
Load Protection |
On/off muting, AC coupling (CMX 300Va and CMX 500Va), triac crowbar (CMX 800Va and CMX 2000Va on each channel) |
||||
Power Requirements |
120 and 230 VAC, 50 – 60 Hz |
||||
Dimensions (HWD)2 RU models3 RU model (CMX 2000Va) |
3.5" (8.9 cm) 2 rack spaces x 19" (48.3 cm) rack mounting x 15.9" (40 cm) deep to rear support ears5.25" (13.3 cm) 3 rack spaces x 19" (48.3 cm) rack mounting x 15.9" (40 cm) deep to rear support ears |
||||
Weight - Net |
35 lb (15.9 kg) |
40 lb (18.2 kg) |
44.5 lb (20.2 kg) |
75 lb (33.1 kg) |
|
Weight - Shipping |
41 lb (18.6 kg) |
46 lb (20.9 kg) |
50.5 lb (23 kg) |
87 lb (37.2 kg) |
เขียนข้อคิดเห็น
ชื่อของคุณ:ความคิดเห็น: หมายเหตุ: HTML นี้ไม่สามารถแปล!
ให้คะแนน: แย่ ดี
พิมพ์รหัสป้องกันสแปม: